Our story begins with what it truly means to be a technology innovator. It stems from a common sense of purpose that unites the people of Schlumberger who, representing more than 160 nationalities, provide leading digital solutions and deploy ground-breaking technologies to enable performance and sustainability that are crucial for the global energy industry.
With expertise in more than 120 countries, we partner with customers in close collaboration to create industry-changing technologies that unlock cleaner, safer access to energy for every community—including those we live and work in
We’ve always built our business around our customers and their endeavors; they are at the center of everything we do. Bringing together talented people from all over the globe, we’re working on the industry’s most complex and pressing challenges to anticipate and align with our customers’ needs. We want to be their performance partner of choice.
To achieve this goal and deliver the best results, we must combine our unique talents and our collective expertise—not just within Schlumberger but by working closely with our suppliers, contractors, and business partners.
We are industry leaders because of our exceptional and talented people. They are the core that drives our purpose and integrity, which fuel our belief that everyone should have the opportunity to reach their greatest potential. Ever-evolving and constantly innovating, we transcend every cultural and technological boundary set before us. Indeed, it is our diversity that makes us stronger. Together, we achieve more.
Act as a technical expert for Structural design issues, and perform structural design calculations as necessary. Ensure compliance of Schlumberger structural design with applicable industry codes, standards and regulations, client specifications
Meet or exceed customer expectations in a timely manner within the budget limits.
Maintain state-of-the-art knowledge in all pertinent aspects of the discipline including design, analysis techniques, products, applicable codes and construction practices related to assigned projects.
Create or check the “Design Basis” documents specific to the particular project. The document is based on the applicable Codes, client specifications, Cameron scope of supply, and approved exception list.
Perform or check Structural calculations with all applicable design loads and design combinations in accordance with the “Design Basis”.
Interact with Cameron Regional offices and assist with structural engineering design, as required.
Work independently with minimal supervision. Check the work by others as required.
Involve in preparing manhour estimation and steel weight estimation. Also actively takepart in preparing the schedule for various activities in structural engineering
Review of structural calculations performed by junior structural engineers. Represent structural discipline in interdisciplinary reviews
Advise and assist project and discipline engineers with the interpretation and clarification of applicable industry Codes and Client Specification requirements.
Advise and assist Construction Managers, QA/QC, and Subcontractors with the interpretation and clarification of construction documents.
Participate in continuing education to maintain professional status as required by licensing authorities and to enhance professional skills
Minimum Job Qualifications
8+ years relevant experience within the Oil and Gas industry
Bachelor’s in Civil Engineering / Masters in Structural Engineering
Proficient in Structural engineering software’s viz. STAAD PRO, SACS and MS Office for manual calculations to produce high quality engineering as per Industry and Safety standard with minimum guidance.
Knowledge and exposure of Offshore and Onshore Industry Engineering standards & Codes – API, AISC, ASCE, BS, EURO, OSHA, ACI, AWS etc.,
Under the direct supervision of the Project Lead Piping Designer or Engineer, he develops and checks system design CAD files or drawings in conformance with project specifications, scope of work, design parameters, Standards, codes, Procedures, industry practices, P&IDs, Line list, Stress information and vendor data.
Assist engineers with initial design and final design solutions on a project.
Conceptualize plans, details and sections to accurately convey construction or fabrication requirements.
Prepares and develops 2D and/ or 3D CAD designs under the supervision of the Lead Piping Designer or Engineer.
Responsible for checking and back checking computer models and piping drawings
Ensure compliance with approved design standards, to provide quality design.
Coordinate vendor supplied drawings or information into project drawings.
Extract computer piping drawings and isometrics.
Prepare Bill of Material and Communicate and interface with other engineering disciplines.
Attend CAD model reviews as required.
Maintaining project documentation and teaming up with process engineers.
Perform with civil or structural along with stress departments to assure suitable flexibility and assist piping systems.
Ensure performance of staff members is in compliance with established project standards.
Review project parameters related to piping requirements and Participate project meetings plus provide project status.
Prepare and manage schedule for piping design projects.
Ability and willingness to travel, as required Estimated at up to 10%.
As applicable, must be able to perform or assist in the performance of problem root cause analysis and lessons learned.
As required, must be able to assists in on-the-job-training and mentoring of assigned personnel.
Minimum Job Qualifications
Diploma in Mechanical Engineering
Minimum of 8 years of piping design experience in relevant Oil and Gas Projects.
Proficient in current release of PDMS, E3D, AutoCAD, CADWorx or other 3D Software’s.
Highly motivated, eager to contribute to the establishment of an effective and efficient design/ drafting team
Prior work experience in Production Facility Engineering, Management of Construction suppliers, Site Engineering support for Pre-commissioning, Commissioning activities.
Facilities Engineering and Construction, with strong Engineering background
PROCESS SYSTEMS-PRODUCT ENGINEER
Perform process engineering calculations and address the process engineering design challenges. Keep abreast of industry codes, standards, regulations and guidelines. Meet or exceed project expectations in a timely manner within the budget limits. Co-ordination with intra / inter disciplinary team and provide the required deliverables as and when requested.
Defines the process to optimize product delivery throughout the facility, considering inputs from clients, products specifications, and cost of solution.
Size and define process equipment and utilities for O&G facilities during proposal and project execution
Review and understand client specifications during proposal phase. Raise clarifications and deviations not inline with Company standards.
Create the design basis, project specifications and philosophies.
Perform process engineering and develop all process engineering deliverables conforming to project specifications and international standards, as per project schedule and considering project budget.
Size and define all process systems and utilities to support on cost estimation during proposals and finalize detail sizing and specification during project execution. Define material selection for piping and equipment.
Lead and assist junior process engineers when developing engineering deliverables.
Provide inputs to other disciplines during project execution.
Participate in engineering meetings.
Provide engineering hours estimate during proposals for its discipline. Responsible for tracking engineering hours for its discipline during project execution.
Prepare technical requisition and technical bid analysis for safety studies. Participate in HAZOP, HAZID, SIL and other safety studies.
Participate in 3D model interdisciplinary reviews.
Review, comment and approve the outsourced process engineering design.
Co-ordinate with the piping team in development of plot plan.
Produce Installation, Operation (Start-up and Shut-down) and Maintenance Instruction manuals, including lists for Consumables, Special Tools, Lubricants, and Utilities.
Perform on-site start-up and / or trouble shooting.
Maintain state-of-the-art knowledge in its discipline in accordance to applicable codes and standards.
Provide support to processing facilities as required by Operations on engineering/technical matters.
Ability and willingness to travel, as required to fulfill project and business needs.
Actively support, participate in, and maintain the integrity and on-going function of the company and facility HSSE program; ensuring a safe/healthy work environment
Minimum Job Qualifications
B.E / B.Tech in Chemical Engineering with 15+ years Industry experience
Prior work experience in EPCs, Engineering Consultancies, Production Facility Engineering, Site Engineering support for Pre-commissioning, Commissioning activities
Perform Process Simulations, P&IDs, BFD, PFDs, UFDs, Heat and Material Balance, Process Equipment datasheets, relief and blowdown studies, PSV load scenario analysis, flare network and flare radiation calculations.
Thorough facility process engineering knowledge with strong Engineering background.
Good knowledge of commercial simulation programs such as Symmetry, HYSYS, Flare Net, Promax etc
Electric Bike Manufacturing Company Job Vacancy |Ather Energy | B.E, B.Tech – Mech, Production, Auto.
Designation: Battery Engineer
Bachelor’s or master’s in Mechanical/Electrical Engineering
3 to 4 years’ experience in the design and development of electronic packaging, peripheral development for electric vehicles
Role : Permanent
Job Description :
Design concepts to ensure that the battery meets its functional requirements
Design and evaluate various thermal management solutions
Demonstrate continual improvement of departmental procedures as per the requirements of the corporate QS standards
Deliver design definitions for prototype and production batteries
Work on testing requirements for projects
Drive focus on design thinking and design language
Ensure that Cost, Quality & Schedule goals are met for programs/projects along with driving compliance with corporate guidelines on DFM, DFA, and component selection/derating
Liaise with NPD, Sourcing, VD, other engineering teams, integrators, and technicians in the Battery lab to deliver prototype and production designs
Own component designs through deliverables like component requirements/specifications, concepts, DFMEAs, DFX, tolerance stacks, detailed component and assembly drawings, component and assembly validation plans, and manufacturing drawings
Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.
Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees.